Angstrom Advanced Inc. designs, manufactures and supplies variety of scientific instruments and Hydrogen & Nitrogen plants for academic and industrial fields. Angstrom Advanced instruments and plants have been delivered to many renowned organizations. Angstrom Advaned goal is to provide our customers with the best products with highest standard of service at cost efficient pricing. Angstrom Advanced now provides several product lines including Spectrophotometer, X-ray Diffractometer, Gas Generator, Atomic Force Microscope/Scanning Probe Microscope, Hydrogen Generating Plant and Nitrogen Generating Plant. Angstrom Advanced corporate headquarters are located  in Massachusetts, USA. Angstrom Advanced have numerous partnerships, representatives in countries around the world.

Angstrom Advanced delivers a reputable and highly efficient world accepted Hydrogen and Nitrogen Generating Plants for refinery, petrochemical and other industrial applications. Angstrom Advanced services for Angstrom Hydrogen Plant projects typically include conceptual design, detailed engineering, procurement, fabrication, construction, start-up and operational training. Angstrom Advanced production line of Gas Generators includes Hydrogen Plant, Nitrogen Plant and Air Plant. Angstrom Advanced provide combination Plants for both Hydrogen and Nitrogen, and Air and Hydrogen. Angstrom Advanced generators have state of the art technology, stability and functionality for scientific instruments, industry and solar and wind energy. Angstrom Advanced provide a lump-sum, turnkey solution, handling everything from concept to start-up with their own resources whenever possible.


Angstrom Advanced Hydrogen Generating Plant product line include technologies such as:

  • Angstrom Advanced Hydrogen Plant by Water Electrolysis
  • Angstrom Advanced Hydrogen Plant by Natural Gas Steam Reforming
  • Angstrom Advanced Hydrogen Plant by Pressure Swing Adsorption with Purifying System
  • Angstrom Advanced Hydrogen Plant by Ammonia Decomposition with Purifying System
  • Angstrom Advanced Hydrogen Plant by Methanol Decomposition

Angstrom Advanced offers gas and liquid Nitrogen Generating Plants from 0.5 m3/hr to 10000 m3/hr. Angstrom Advanced are on the forefront of technologies for Pressure Swing Adsorption (PSA) and Membrane Separation and providing turn-key nitrogen generation projects to meet different industrial applications. Angstrom Advanced also offers Nitrogen Purifying System to purify the nitrogen up to 99.9995%. Nitrogen/Oxygen Plant by Pressure Swing Adsorption (PSA).

Angstrom Advanced Nitrogen Generating Plant product line include technologies such as:

  • Angstrom Advanced Nitrogen Plant by Membrane Separation
  • Angstrom Advanced Nitrogen Purifying System
  • Angstrom Advanced Liquid Nitrogen, Oxygen, Argon Plant by Cryogenic Technology

Angstrom Advanced Atomic Force Microscope / Scanning Probe Microscope include AFM, SPM, STM, LFM, EFM. All of Angstrom Advanced Microscope line-up bring state the art technology to meet the most advanced applications and are designed to provide images of atomic scale up to 100 micrometer. With a Digital Signal Processor inside the system Angstrom Advanced systems can handle complicated multi-functional tasks efficiently. Angstrom Advanced Atomic Force Microscopes (AFM) which has full coverage of Contacting Mode, Tapping Mode, Phase Imaging and Lifting Mode, Lateral Force Microscope (LFM), Scanning Tunneling Microscope (STM), Conductive AFM, SPM in liquid, Environmental Control SPM, Nano-Processing System including Lithography Mode and Vector Scan Mode.

Angstrom Advanced has been bringing forth the latest advancements in all fields of technology and was founded by a group of engineers that realized the importance to research and development for the better of mankind. Angstrom Advanced location in the heart of high technology schools and Institutes made us a leading developer and manufacturer of Scientific instruments. Angstrom Advanced instruments have been delivered to many renowned universities, research institutes and companies worldwide. Angstrom Advanced goal is to supply the most accurate and sustainable scientific instrument with the highest standard of customer satisfaction.

Learn more by going on Angstrom Advanced website:

Introduction  to: Atomic Force Microscope & Scanning Probe Microscope

The AFM consists of a cantilever with a sharp tip (probe) at its end that is used to scan the specimen surface. The cantilever is a silicon or silicon nitride with a tip radius of curvature on the order of nanometers. When the tip is brought into proximity of a sample surface, forces between the tip and the sample lead to a deflection of the cantilever according to Hooke’s law. Depending on the situation, forces that are measured in AFM include mechanical contact force, van der Waals forces, capillary forces, chemical bonding, electrostatic forces, magnetic forces, Casimir forces, solvation forces, etc. Along with force, additional quantities may simultaneously be measured through the use of specialized types of probe. Typically, the deflection is measured using a laser spot reflected from the top surface of the cantilever into an array of photodiodes. Other methods that are used include optical interferometry, capacitive sensing or piezoresistive AFM cantilevers. These cantilevers are fabricated with piezoresistive elements that act as a strain gauge. Using a Wheatstone bridge, strain in the AFM cantilever due to deflection can be measured, but this method is not as sensitive as laser deflection or interferometry.

Atomic force microscope topographical scan of a glass surface. The micro and nano-scale features of the glass can be observed, portraying the roughness of the material. The image space is (x,y,z) = (20um x 20um x 420nm).If the tip was scanned at a constant height, a risk would exist that the tip collides with the surface, causing damage. The feedback mechanism is employed to adjust the tip-to-sample distance to maintain a constant force between the tip and the sample. The sample is mounted on a piezoelectric tube, that can move the sample in the z direction for maintaining a constant force, and the x and y directions for scanning the sample. The tip is mounted on a piezo scanner while the sample is being scanned in X and Y using another piezo block. The resulting map of the area z = f(x,y) represents the topography of the sample. The AFM can be operated in a number of modes, depending on the application. In general, possible imaging modes are divided into contact modes and a non-contact modes where the cantilever is vibrated.

Types of Atomic Force Microscopes

Angstrom Advanced Atomic force microscopy (AFM)

Atomic force microscopy (AFM) or scanning force microscopy (SFM) is a very high-resolution type of scanning probe microscopy, with demonstrated resolution on the order of fractions of a nanometer, more than 1000 times better than the optical diffraction limit. The precursor to the AFM, the scanning tunneling microscope, was developed by Gerd Binnig and Heinrich Rohrer in the early 1980s at IBM Research – Zurich, a development that earned them the Nobel Prize for Physics in 1986. Binnig, Quate and Gerber invented the first atomic force microscope (also abbreviated as AFM) in 1986. The first commercially available atomic force microscope was introduced in 1989. The AFM is one of the foremost tools for imaging, measuring, and manipulating matter at the nanoscale. The information is gathered by “feeling” the surface with a mechanical probe. Piezoelectric elements that facilitate tiny but accurate and precise movements on (electronic) command enable the very precise scanning. In some variations, electric potentials can also be scanned using conducting cantilevers. In newer more advanced versions, currents can even be passed through the tip to probe the electrical conductivity or transport of the underlying surface, but this is much more challenging with very few research groups reporting reliable data.

Angstrom Advanced Scanning Probe Microscopy (SPM)

Scanning Probe Microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen. An image of the surface is obtained by mechanically moving the probe in a raster scan of the specimen, line by line, and recording the probe-surface interaction as a function of position. SPM was founded with the invention of the scanning tunneling microscope in 1981. Many scanning probe microscopes can image several interactions simultaneously. The manner of using these interactions to obtain an image is generally called a mode. The resolution varies somewhat from technique to technique, but some probe techniques reach a rather impressive atomic resolution. They owe this largely to the ability of piezoelectric actuators to execute motions with a precision and accuracy at the atomic level or better on electronic command. One could rightly call this family of techniques “piezoelectric techniques”. The other common denominator is that the data are typically obtained as a two-dimensional grid of data points, visualized in false color as a computer image.

Angstrom Advanced Scanning Tunneling Microscope (STM)

A scanning tunneling microscope (STM) is an instrument for imaging surfaces at the atomic level. Its development in 1981 earned its inventors, Gerd Binnig and Heinrich Rohrer (at IBM Zürich), the Nobel Prize in Physics in 1986. For an STM, good resolution is considered to be 0.1 nm lateral resolution and 0.01 nm depth resolution. With this resolution, individual atoms within materials are routinely imaged and manipulated. The STM can be used not only in ultra high vacuum but also in air, water, and various other liquid or gas ambients, and at temperatures ranging from near zero kelvin to a few hundred degrees Celsius. The STM is based on the concept of quantum tunneling. When a conducting tip is brought very near to the surface to be examined, a bias (voltage difference) applied between the two can allow electrons to tunnel through the vacuum between them. The resulting tunneling current is a function of tip position, applied voltage, and the local density of states (LDOS) of the sample. Information is acquired by monitoring the current as the tip’s position scans across the surface, and is usually displayed in image form. STM can be a challenging technique, as it requires extremely clean and stable surfaces, sharp tips, excellent vibration control, and sophisticated electronics. Magnetic force microscope (MFM) Magnetic force microscope (MFM) is a variety of atomic force microscope, where a sharp magnetized tip is scanning the magnetic sample; the tip-sample magnetic interactions are detected and used to reconstruct the magnetic structure of the sample surface. Many kinds of magnetic interactions are measured by MFM, including magnetic dipole–dipole interaction.

Angstrom Advanced Electrostatic force microscopy (EFM)

Electrostatic force microscopy (EFM) is a type of dynamic non-contact atomic force microscopy where the electrostatic force is probed. (“Dynamic” here means that the cantilever is oscillating and does not make contact with the sample). This force arises due to the attraction or repulsion of separated charges. It is a long-ranged force and can be detected 100 nm from the sample. For example, consider a conductive cantilever tip and sample which are separated a distance z usually by a vacuum. A bias voltage between tip and sample is applied by an external battery forming a capacitor between the two. The capacitance of the system depends on the geometry of the tip and sample. Conductive atomic force microscopy (C-AFM) Conductive atomic force microscopy (C-AFM) is a variation of atomic force microscopy (AFM) and scanning tunneling microscopy (STM), which uses electrical current to construct the surface profile of the studied sample. The current is flowing through the metal-coated tip of the microscope and the conducting sample. Usual AFM topography, obtained by vibrating the tip, is acquired simultaneously with the current. This enables to correlate a spatial feature on the sample with its conductivity, and distinguishes C-AFM from STM where only current is recorded. A C-AFM microscope uses conventional silicon tips coated with a metal or metallic alloy, such as Pt-Ir alloy.

Angstrom Advanced Lateral Force Microscopy (LFM)

Lateral Force Microscopy (LFM) measures the deflection of the cantilever in the horizontal direction . The lateral deflection of the cantilever is a result of the force applied to the cantilever when it moves horizontally across the sample surface,and the magnitude of this deflection is determined by the frictional coefficient, the topography of the sample surface, the direction of the cantilever movement, and the cantilever’s lateral spring constant. Lateral Force Microscopy is very useful for studying a sample whose surface consists of inhomogeneous compounds. It is also used to enhance contrast at the edge of an abruptly changing slope of a sample surface, or at a boundary between different compounds.

Base of Atomic Force Microscope and Scanning Force Microscope

The base of Atomic Force Microscope holds the detector, AFM Head. It also has environmental control attachment along with other optional attachments such as Vibration Isolation System.



Atomic Force Microscope & Scanning Force Microscope Controller

The SPM Controller handles all SPM electronics such as signal processing and feedback programming. The Controller inputs commands from a control computer via 60 pin cable and outputs the control signals that are needed for operating an AFM stage. Additional signals from the stage are relayed through the SPM Controller via the Network cable to the control computer. At the rear of the Controller, in addition to the Network cable connection, there are two input/output ribbon cables. A 60-pin cable is used to send and receive signals from the microscope stage. A second 50-pin cable is used for accessing all of SPM Controllers signals for testing or experimentation.



Atomic Force Microscope & Scanning Probe Microscope Head

AFM Head holds the following components:
XY Translation Stage: Holds probe head, movable in XY direction by XY translation screws and in Z direction by controls in software
Position Sensitive Photo detector (PSPD): Detects laser deflections, which is then converted into a topographical map
PSPD adjustment screws: controls position of PSPD; screw on left controls up and down adjustment; screw on right controls left right adjustment
Laser Beam Steering Screws: controls position of laser on back of cantilever 

Atomic Force Microscopes & Scanning Probe Microscopes Tip holders

AFM Tipholder: 1. Tip holder Handle 2. Spring Clip which secure the cantilever 3. Cantilever notch STM Tipholder: 1. Tip holder Handle 2. Installation tube for Pt-Ir or tungsten tips 

Aotomic Force Microscope & Scanning Probe Microscope Software

The Software is available with the following data types of images AFM Contact Mode: Topography — the rise and fall of the sample surface. Deflection — cantilever flexes because of the rise and fall of sample topography and the amount of this deflection can be reflected by the Photodectetor’s Up-Down signal. Friction — lateral forces between tip and sample, which causes the torsion of the cantilever and can be reflected by the Photodectetor’s Left-Right signal. AFM Tapping Mode: Topography — he rise and fall of the sample surface. Amplitude — antilever oscillating amplitude changes because of the rise and fall of sample topography. Phase — cantilever oscillating phase changes because of the sample material characteristics. Scanning Tunneling Microscope: Topography — the rise and fall of the sample surface. Current — Tunneling current changes between tip and sample 

Atomic Force Microscope & Scanning Force Microscope Vibration Isolation Stand

AFM Vibration Isolation System is made of the highest grade components, minimizing vibration of the Atomic Force Microscope and improving sample quality

Atomic Force Microscope & Scanning Probe Microscope Probes

Different kinds of probes can be used in an Atomic Force Microscope. Proper probe selection depends on sample characteristics and system conditions.
Metal Probes
Probe used in STM must be conductive and a atomic-sharp tip is required. STM tips can be obtain by simply cut (for Pt-Ir) and electronically eroded (for tungsten).

Cantilever Probes
A flexible cantilever with an atomic-sharp tip is widely used in AFM as below.

Most cantilever probes are made by Si or SiN with different types of coatings and different shape and size.
Different samples and system conditions required different cantilevers.

Contact Mode: Theoretically all kinds of cantilever probes can be used in contact mode. But because of the different Force constant parameters, harder cantilever will cause the sample damages with the same amount of deflection.

Tapping Mode: A oscillating cantilever is required in Tapping mode. So theoretically using cantilevers with higher resonance frequency will give better resolution. Cantilevers with larger force constant and higher resonance frequency (normally over 200kHz) should be chosen.


One Response to “Angstrom-Advanced”

  1. Angstrom Advanced Says:

    Below are some things a buyer should know before purchasing a Large Nitrogen Generator:

    Hydrogen purity
    Produced gas pressure
    Dimensions of available space
    Fire hazard
    Process description
    Plant description
    Plant control instruments

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: